FLOW-SIHER d.o.o.

 Lufttechnik / Anemometer/Mikromanometer,...

SIHER d.o.o.
Fluke 975 AirMeter™
Fluke 975 AirMeter™  
  • Temperature
  • Velocity
  • Humidity
  • CO2
  • CO

HVAC - IAQ

 

Luft-Messtechnik

Anemometer LCA-301Anemometer LCA-301  
  • Technische Daten
  •   für Luftgeschwindigk. u. Volumenstrom 100mm Rad
  • Bereich: 0,25-30m/s, 0,01 bis 3000m³/s
  • Genauigk.: ±1%, (vom Messwert)
  • 339,00 EUR  
  Volumenstromhaube BVolumenstromhaube B    
  • 1-teiliges Set zur genauen Messung des Volumenstroms,
  • für 100mm Flügelräder
  • Volumenstromhaube Set B rund 335 x 335 mm
  • 125,00 EUR
Volumenstromhaube Set AVolumenstromhaube Set A  
  • 2-teiliges Set zur genauen Messung des Volumenstroms, für 100mm Flügelräder
  • Volumenstromhaube Set A 285 x 235 mm und Ø180mm
  • 125,00 EUR

ISO KalibrierzertifikatISO Kalibrierzertifikat

  • ISO-Kalibrierzertifikat zum Einhalten Ihrer
  • DIN ISO 9000.
  • 110,00 EUR

Flow monitors and Flow indicators for Oil (viscosity compensated)

DUG -  Flow monitors and Flow indicators with sight glass

Flow monitor and indicator for liquids
  • wide measuring range
  • sturdy construction
  • installation in any orientation
  • high switch accuracy

 

Download data sheet

for liquids (0,2 - 250 l/min)
Operating temperature max.:
100°C (opt. 160°C)
Operating pressure max.:
PN 10 bar
any orientation
any flow direction
Switch contact: Normally open or change over (optional)
Display: Sight glass
EX-proof to ATEX (optional)
UL-certified (optional)
Operation:
The flow monitors and indicators type DUG operate with the float measuring principle.
Flow monitors and Flow indicators in full metal version
Ultrasonic flowmeters
Calorimetric flowswitch

http://www.meister-flow.com

02/462-20-41

DKM/A   -Flow monitors and Flow indicators for Oil (viscosity compensated)

Flow monitor and indicator for oil
  • viscosity compensated
  • special liquids
  • high operating pressure
  • installation in any orientation

 

Download data sheet

for oils (0,1 - 110 l/min)
Viscosity: 30 - 600 cSt
Operating temperature max.:
120°C (opt. 160°C)
Operating pressure max.:
PN 250 bar (brass), PN 300 bar (st. st.)
any orientation
any flow direction
Switch contact: Normally open or change over (optional)
mechanical display
EX-proof to ATEX (optional)
UL-certified (optional)
Operation:
The flow monitors and indicators type DKM/A operate with the float measuring principle.
03 / Flow monitors and Flow indicators for Oil (viscosity compensated)